- 4mm Tempered Glass Side Panel: Full-length tinted tempered glass showcases your build and RGB lighting from every angle.
- 4x Fans Included: Ships with three 120mm PWM fans and one 120mm ARGB fan — all pre-installed, no extra purchases needed to get airflow on day one.
- 1-to-8 ARGB LED Hub: Control up to eight ARGB devices from a single hub with seven lighting modes via the front LED button, or sync everything through MSI Mystic Light in MSI Center.
- Massive Radiator Support: Fits up to a 420mm radiator in the front and a 360mm radiator on top — ideal for high-end liquid cooling setups.
- E-ATX Compatible: Supports Extended-ATX (up to 272mm width), ATX, Micro-ATX, and Mini-ITX motherboards — plenty of room for flagship builds.
- 400mm GPU Clearance: Accommodates even the longest triple-fan graphics cards including NVIDIA RTX 50-series models.
- 170mm CPU Cooler Clearance: Fits most large tower air coolers without interference.
- 3D Printable Customization: MSI-designed mounting points and 3D-printable bracket files let you print custom nameplates, logos, and panels — personalize your build in a way no other case at this price allows.
- Generous Storage Bays: 2x 3.5" HDD bays (2.5" compatible) and 4x dedicated 2.5" SSD mounts keep storage organized and accessible.
- Clean Cable Management: Routed cable channels and tie-down points behind the motherboard tray make cable management straightforward.
- Mystic Light Sync: ARGB lighting syncs with MSI motherboards, GPUs, and accessories through MSI Center for a fully unified lighting setup.
- Nordic-Inspired Design: Black and grey colorway with triangular front accents echoes the sharp geometry of a spear — understated enough for any desk, bold enough to stand out.
- Supports up to 360 mm AIO liquid cooler and large 40 series GPU.
- Supports up to 11 x system fans configuration, providing ventilation and stable performance to the whole system.
- Built-in ARGB fans and control board, providing striking lighting and vivid lighting effects.
- 1 x USB 3.2 Gen 2x2 Type-C port (20Gbps) & 2 x USB 3.2 Gen 1 Type-A ports (5Gbps).
- Tempered Glass Side Panel displays ARGB lighting effects.
- The Magnetic Dust Filter on the top vents being easily remove for cleaning.
- LED Switch button provides intuitively control & 9 lighting effects.
- Micro-ATX Back-connect motherboard supported.
- Supports up to 360 mm AIO liquid cooler on the top.
- 270-degree panoramic tempered glass.
- Supports up to 10 x 120 mm system fans.
- Built-in 1-to-4 ARGB-PWM fans and control board, providing striking lighting and vivid lighting effects.
- The Magnetic Dust Filter at the bottom being easily removed for cleaning.
- DIY Friendly cables make your DIY process easier and create more possibilities to your system.
- Micro-ATX Back-connect motherboard supported.
- Supports up to 360 mm AIO liquid cooler on the top.
- 270-degree panoramic tempered glass.
- Supports up to 10 x 120 mm system fans.
- Built-in 1-to-4 ARGB-PWM fans and control board, providing striking lighting and vivid lighting effects.
- The Magnetic Dust Filter at the bottom being easily removed for cleaning.
- DIY Friendly cables make your DIY process easier and create more possibilities to your system.
- The MAG FORGE 112R's ARGB lighting is fully supported by MSI Mystic Light.
- Insta-light Loop Button.
- Magnetic Dust Filter
- Tool-less Tempered Glass Side Panel.
- Optimize Airflow.
- ARGB Fan included.
- 240 mm Radiator Support.
- 330 mm GPU Length Support.
- 160 mm CPU Cooler Height Support.
- Supported ATX and Micro-ATX Back-connect motherboard.
- Supports 360 mm radiator on the top, side and bottom
- 270-degree panoramic tempered glass.
- Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear.
- 1-to-4 ARGB-Fan control board.
- Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission.
- Removable dust filter at the top, side and bottom being easily removed for cleaning.
- UNI front panel cable make your DIY process easier and create more possibilities to your system.
- 270-Degree Display: The chassis features a 270-degree panoramic design with tempered glass, providing an expansive view to showcase detailed components.
- Measurements: Supports multiple motherboard sizes, including regular ATX, Micro-ATX, Mini-ITX and back-connect ATX and Micro-ATX, allowing users to customize their PC setup.
- Pre-build with Reverse Blades Fan: Pre-installed reverse blade fans on the side ensure an unobstructed display of the ARGB fan’s lighting effects, free from interference by fan frames.
- ARGB-Fan Control Board: The 1-to-5 ARGB fan control board supports up to 5 ARGB fans, allowing users to adjust 18 ARGB lighting effects with a single LED switch button
- Upgrade Airflow Layout: Supports up to 10 fans, a 360mm radiator on top and a 120mm radiator at rear. The lower chamber, surrounded by vents, further enhances heat dissipation for optimal performance.
- 270-Degree Display: The chassis features a 270-degree panoramic design with tempered glass, providing an expansive view to showcase detailed components.
- Measurements: Supports multiple motherboard sizes, including regular ATX, Micro-ATX, Mini-ITX and back-connect ATX and Micro-ATX, allowing users to customize their PC setup.
- Pre-build with Reverse Blades Fan: Pre-installed reverse blade fans on the side ensure an unobstructed display of the ARGB fan’s lighting effects, free from interference by fan frames.
- ARGB-Fan Control Board: The 1-to-5 ARGB fan control board supports up to 5 ARGB fans, allowing users to adjust 18 ARGB lighting effects with a single LED switch button
- Upgrade Airflow Layout: Supports up to 10 fans, a 360mm radiator on top and a 120mm radiator at rear. The lower chamber, surrounded by vents, further enhances heat dissipation for optimal performance.
- Floating base design, creating a custom space for figures, turning hardware into desktop art.
- one-piece pogo pin mesh front panel with pre-installed 2 x 160 mm fans.
- Supports regular ATX, Micro-ATX, Mini-ITX, and Back-connect ATX and Micro-ATX motherboards.
- Quick snap-and-lock PSU cover for easy assembly and streamlined cable management, optimizing the building process.
- Synergizes with compatible MSI motherboards through a USB 20Gbps (Type-C) port for high-speed data transmission.
- Tool-free design at the top, sides just a snap away—simply pull, release, and start in seconds.
- Floating base design, creating a custom space for figures, turning hardware into desktop art.
- L-shaped curved fully tempered glass with an EZ-detach design for safer, more convenient removal.
- Supports regular ATX, Micro-ATX, Mini-ITX, and Back-connect ATX and Micro-ATX motherboards.
- Pre-installed with 2 x 140 mm ARGB reversed blades Fan at the side and 1 x 120 mm ARGB fan at the rear.
- Quick snap-and-lock PSU cover for easy assembly and streamlined cable management, optimizing the building process.
- Synergizes with compatible MSI motherboards through a USB 20Gbps (Type-C) port for high-speed data transmission.
- Tool-free design at the top, sides just a snap away—simply pull, release, and start in seconds.
- Bright Lights: Animate your rig with RGB via the MSI LED button.
- Superior Cooling: Four 120 mm ARGB fans provide powerful airflow.
- Versatile Build: Supports ATX boards and 360 mm radiators.
- Modern Look: Tempered glass and geometric front panel style.
- Supports regular EATX, ATX, Micro-ATX, Mini-ITX and Back-connect ATX motherboards, meeting various PC build requirements.
- The Dual Layer Blades Fan consists of outer and inner ring blades that rotate simultaneously, creating concentrated airflow and enhanced heat dissipation.
- Pre-installed with 2 x 160 mm ARGB Dual Layer Blades Fan at the front and 1 x 120 mm Dual Layer Blades Fan at the rear.
- The adjustable EZ bracket on the front panel supports fan sizes of 160mm x 2, 140mm x 3, and 120mm x 3, as well as a water cooling distro plate, allowing for flexible installation.
- Quick snap-and-lock PSU cover for easy assembly and streamlined cable management, optimizing the building process.
- Compatible with up to 13 pieces of fans, 3 pieces of 360 mm Radiator, one Pump Reservoir or one water cooling distro plate.
- 1-to-4 ARGB-Fan control board.
- Synergizes with compatible MSI motherboards through a USB 20Gbs (Type-C) port for high-speed data transmission.
- Removable dust filters at the top, front, side and bottom for easy cleaning.
- 1
- 2


