- Supports regular EATX, ATX, Micro-ATX, Mini-ITX and Back-connect ATX motherboards, meeting various PC build requirements.
- The Dual Layer Blades Fan consists of outer and inner ring blades that rotate simultaneously, creating concentrated airflow and enhanced heat dissipation.
- Pre-installed with 2 x 160 mm ARGB Dual Layer Blades Fan at the front and 1 x 120 mm Dual Layer Blades Fan at the rear.
- The adjustable EZ bracket on the front panel supports fan sizes of 160mm x 2, 140mm x 3, and 120mm x 3, as well as a water cooling distro plate, allowing for flexible installation.
- Quick snap-and-lock PSU cover for easy assembly and streamlined cable management, optimizing the building process.
- Compatible with up to 13 pieces of fans, 3 pieces of 360 mm Radiator, one Pump Reservoir or one water cooling distro plate.
- 1-to-4 ARGB-Fan control board.
- Synergizes with compatible MSI motherboards through a USB 20Gbs (Type-C) port for high-speed data transmission.
- Removable dust filters at the top, front, side and bottom for easy cleaning.
$149.99
- Optimized to provide generous and effective airflow for system cooling with vents built throughout the system.
- Comes with a vertical GPU bracket as an accessory that allows you to mount your graphics card vertically.
- Comes with a side air vent that can support up to 2 fans / 240mm radiator.
- The 3mm hinged tempered glass swinging window offers the best durability and system accessibility.
- The MPG VELOX 100 Series can mount up to 7 fans.
$139.99
- One-piece 1mm perforated front panel, supporting dual 360mm AIO liquid cooler at front/top and Push-Pull setup.
- Fully support high-end graphics card no matter vertical or horizontal installation and also reserves enough space to ensure cooling and cable bending.
- Omnidirectional graphics card stand can adjust in many ways to support different graphics card installation.
- Patented DIY friendly design for easy to assemble.
- 4 x 120mm ARGB fans pre-installed (Mystic Light compatible).
- E-ATX (280 x 305 mm), ATX, Micro-ATX and Mini-ITX motherboard & 360 mm GPU capacity.
- 1 x USB 3.2 Gen 2x2 Type-C port (20Gbps) & 2 x USB 3.2 Gen 1 Type-A ports (5Gbps).
$179.99
- One-piece 1mm perforated front panel, supporting dual 360mm AIO liquid cooler at front/top and Push-Pull setup.
- Fully support high-end graphics card no matter vertical or horizontal installation and also reserves enough space to ensure cooling and cable bending.
- Omnidirectional graphics card stand can adjust in many ways to support different graphics card installation.
- Patented DIY friendly design for easy to assemble.
- 4 x 120mm ARGB fans pre-installed (Mystic Light compatible).
- E-ATX (280 x 305 mm), ATX, Micro-ATX and Mini-ITX motherboard & 360 mm GPU capacity.
- 1 x USB 3.2 Gen 2x2 Type-C port (20Gbps) & 2 x USB 3.2 Gen 1 Type-A ports (5Gbps).
Limited Time Offer
$169.99
$149.99
- Bright Lights: Animate your rig with RGB via the MSI LED button.
- Superior Cooling: Four 120 mm ARGB fans provide powerful airflow.
- Versatile Build: Supports ATX boards and 360 mm radiators.
- Modern Look: Tempered glass and geometric front panel style.
$119.99
- 4mm Tempered Glass Side Panel: Full-length tinted tempered glass showcases your build and RGB lighting from every angle.
- 4x Fans Included: Ships with three 120mm PWM fans and one 120mm ARGB fan — all pre-installed, no extra purchases needed to get airflow on day one.
- 1-to-8 ARGB LED Hub: Control up to eight ARGB devices from a single hub with seven lighting modes via the front LED button, or sync everything through MSI Mystic Light in MSI Center.
- Massive Radiator Support: Fits up to a 420mm radiator in the front and a 360mm radiator on top — ideal for high-end liquid cooling setups.
- E-ATX Compatible: Supports Extended-ATX (up to 272mm width), ATX, Micro-ATX, and Mini-ITX motherboards — plenty of room for flagship builds.
- 400mm GPU Clearance: Accommodates even the longest triple-fan graphics cards including NVIDIA RTX 50-series models.
- 170mm CPU Cooler Clearance: Fits most large tower air coolers without interference.
- 3D Printable Customization: MSI-designed mounting points and 3D-printable bracket files let you print custom nameplates, logos, and panels — personalize your build in a way no other case at this price allows.
- Generous Storage Bays: 2x 3.5" HDD bays (2.5" compatible) and 4x dedicated 2.5" SSD mounts keep storage organized and accessible.
- Clean Cable Management: Routed cable channels and tie-down points behind the motherboard tray make cable management straightforward.
- Mystic Light Sync: ARGB lighting syncs with MSI motherboards, GPUs, and accessories through MSI Center for a fully unified lighting setup.
- Nordic-Inspired Design: Black and grey colorway with triangular front accents echoes the sharp geometry of a spear — understated enough for any desk, bold enough to stand out.
Limited Time Offer
$139.99
$69.00
- Reverse Fan Blade
- Patented Magnetic Connector Block
- Magnetic Design optimizes installation experience
- Exclusive Fluid Dynamic Bearing with Extra Nut Fixing
- Copper Tube
- Fan hub & Daisy-chain cable are included in 3-fan pack
Limited Time Offer
$119.99
$69.99
- Reverse Fan Blade
- Patented Magnetic Connector Block
- Magnetic Design optimizes installation experience
- Exclusive Fluid Dynamic Bearing with Extra Nut Fixing
- Copper Tube
- Fan hub & Daisy-chain cable are included in 3-fan pack
Limited Time Offer
$119.99
$69.99
- 3 x 120 mm ARGB cableless fan
- Magnetic design
- Supports PWM control, 0 ~ 1900±10% RPM
- Fan hub included, supports up to 18 x EZ120 fans
- Daisy chain cable included
- Exclusive Fluid Dynamic Bearing Structure
Limited Time Offer
$119.99
$69.99
- 120 mm ARGB cableless fan
- Magnetic design
- Supports PWM control, 0 ~ 1900±10% RPM
- Fan hub included, supports up to 18 x EZ120 fans
- Daisy chain cable included
- Exclusive Fluid Dynamic Bearing Structure
$39.99
- 3 x 120 mm ARGB cableless fan
- Magnetic design
- Supports PWM control, 0 ~ 1900±10% RPM
- Fan hub included, supports up to 18 x EZ120 fans
- Daisy chain cable included
- Exclusive Fluid Dynamic Bearing Structure
Limited Time Offer
$119.99
$69.99
- 120 mm ARGB cableless fan
- Magnetic design
- Supports PWM control, 0 ~ 1900±10% RPM
- Fan hub included, supports up to 18 x EZ120 fans
- Daisy chain cable included
- Exclusive Fluid Dynamic Bearing Structure
$39.99
- CycloBlade Design: Focuses airflow and reduces noise.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Enhanced Cooling for Stable AI Performance: Precise heat source targeting for stable CPU performance
- Easy installation: Pre-installed UNI Bracket (1700/1851/AM4/AM5)
Limited Time Offer
$189.99
$149.99
- CycloBlade Design: Focuses airflow and reduces noise.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Enhanced Cooling for Stable AI Performance: Precise heat source targeting for stable CPU performance
- Easy installation: Pre-installed UNI Bracket (1700/1851/AM4/AM5)
Limited Time Offer
$189.99
$149.99
- MSI's TORX FAN 4.0 provides supreme cooling to the radiator.
- 60 mm TORX FAN 3.0 within the water block provides heat dissipation to the power solutions.
- 2.4” Customizable IPS display: hardware monitor, video & image upload, system clock and live weather.
- The fan and pump speed can be independently controlled according to different user scenarios.
- Latest CPU socket supported: Intel LGA 1700 & AMD AM5.
- A three-layer mesh plastic tube slows down the evaporation speed of water cooling liquid.
Limited Time Offer
$209.99
$139.99
- Premium protection, GPU Safeguard+ and Fan Safeguard
- Server-grade materials, SiC interleaved PFC MOSFET
- Supports Nvidia® GeForce RTX™ 50 series graphics cards
- 2 x native 12V-2x6 connectors
- Dual-color 12V-2x6 cable
- 80 PLUS Titanium certified
- Optimized the sound level
- 100% all Server-grade 105oC capacitor
- Embossed Jacket Cables, the cables are more bending and routing
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
$499.99
- Premium protection, GPU Safeguard+ and Fan Safeguard
- Server-grade materials, SiC interleaved PFC MOSFET
- Supports Nvidia® GeForce RTX™ 50 series graphics cards
- 2 x native 12V-2x6 connector
- Dual-color 12V-2x6 cable
- 80 PLUS Titanium certified
- Optimized the sound level
- 100% all Server-grade 105oC capacitor
- Embossed Jacket Cables, the cables are more bending and routing
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
$399.99
- Supports Nvidia® GeForce RTX 50 series graphics cards
- 2 x native 12V-2x6 connector
- Dual-color 12V-2x6 cable
- 80 PLUS Gold certified
- Optimized the sound level
- 100% all Server-grade 105oC capacitor
- Embossed Jacket Cables, the cables are more bending and routing
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
$109.99
- Supports Nvidia® GeForce RTX 50 Series graphics cards
- Full modular design
- Flat cables
- 80 Plus Gold certified for high efficiency
- 100% all Japanese 105oC capacitor
- Active PFC design
- Industrial level protection with OVP,OCP,OPP,OTP, SCP,UVP
- LLC Half Bridge Topology with DC-DC module design
Limited Time Offer
$139.99
$109.99
- Supports Nvidia® GeForce RTX 50 series graphics cards
- 2 x native 12V-2x6 connector
- Dual-color 12V-2x6 cable
- 80 PLUS Gold certified
- Optimized the sound level
- 100% all Server-grade 105oC capacitor
- Embossed Jacket Cables, the cables are more bending and routing
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
$219.99