- PCIe Gen4x4 interface and complies with the NVMe 1.4 standard
- Sequential Read speeds up to 5000MB/s and Write speeds up to 4200MB/s
- Up to 450 TBW
- Built-in data security and error-correction capabilities
- Suitable for both desktop and notebook
- 5-Year Warranty
- Supports Nvidia® GeForce RTX 50 series graphics cards
- Native 12V-2x6 connector
- Dual-color 12V-2x6 cable
- 80 PLUS Gold certified
- Optimized the sound level
- Main 105oC capacitor
- Embossed Jacket Cables, the cables are more bending and routing
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
- CycloBlade Design: Focuses airflow and reduces noise.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Enhanced Cooling for Stable AI Performance: Precise heat source targeting for stable CPU performance
- Easy installation: Pre-installed UNI Bracket (1700/1851/AM4/AM5)
- Ultrafast WiFi 7 for next-gen speed and low latency
- Tri-band speeds up to 5764 + 2882 + 688 Mbps
- MLO combines links for faster, more stable WiFi
- 320MHz channels deliver interference-free 6GHz WiFi
- Magnetized external antennas for broader coverage
- Bluetooth 5.4 for faster, secure connections
- Support Back-Connect Motherboard: Supports ATX & Micro-ATX Back-Connect boards for tidy setup
- Upgrade Airflow Layout: Supports 10 fans & 360mm radiators with vents for better cooling
- Dust Filter: Magnetic top & bottom dust filters boost airflow and protect parts
- Pre-build with Reverse Blades Fan: Side reverse blade fans showcase ARGB lighting without obstruction
- Package with exclusive MLG figure.
- CycloBlade Design: Focuses airflow and reduces noise.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Enhanced Cooling for Stable AI Performance: Precise heat source targeting for stable CPU performance
- Easy installation: Pre-installed UNI Bracket (1700/1851/AM4/AM5)
- Supports NVIDIA® GeForce RTX 50 series graphics cards
- ATX 3.1 ready, native dual-color PCIe CEM 5.1 connector
- Fully modular design, flat cables
- 80 PLUS Gold certified for high efficiency
- Active PFC design
- Protection with OVP / OCP / OPP / OTP / SCP / UVP
- 135 mm fluid dynamic bearing fan
- LLC full bridge topology with DC-to-DC module design
- The enlarged copper base surface area helps to achieve ultimate heat exchange with the latest CPU generation.
- Maximize micro-channels to dissipate heat efficiently
- Rotatable water block cap for 270-degree.
- ARGB fan can change the lighting by MSI center.
- Enhanced fan performance to dissipate heat quickly.
- Durable three phase motor of the pump generates minimal vibrations for long-lasting operation.
- Spilt pathway through the radiator rapidly dissipates heat.
- Premium protection, GPU Safeguard+ and Fan Safeguard
- Server-grade materials, SiC interleaved PFC MOSFET
- Supports Nvidia® GeForce RTX™ 50 series graphics cards
- 2 x native 12V-2x6 connector
- Dual-color 12V-2x6 cable
- 80 PLUS Titanium certified
- Optimized the sound level
- 100% all Server-grade 105oC capacitor
- Embossed Jacket Cables, the cables are more bending and routing
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
- Dual USB 4.0 ports (USB-C)
- Unprecedented 40Gbp Transfer Rate
- Supports up to 100W power charging
- Dual DisplayPort 1.4 Input ports
- Supports up to PCI-E 4.0 x 4
- Supports Nvidia® GeForce RTX 50 series graphics cards
- Native 12V-2x6 connector
- Dual-color 12V-2x6 cable
- 80 PLUS Gold certified
- Optimized the sound level
- Main 105oC capacitor
- Embossed Jacket Cables, the cables are more bending and routing
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
- Supports up to 360 mm AIO liquid cooler and large 40 series GPU.
- Supports up to 11 x system fans configuration, providing ventilation and stable performance to the whole system.
- Built-in ARGB fans and control board, providing striking lighting and vivid lighting effects.
- 1 x USB 3.2 Gen 2x2 Type-C port (20Gbps) & 2 x USB 3.2 Gen 1 Type-A ports (5Gbps).
- Tempered Glass Side Panel displays ARGB lighting effects.
- The Magnetic Dust Filter on the top vents being easily remove for cleaning.
- LED Switch button provides intuitively control & 9 lighting effects.
- PCIe Gen4x4 interface and complies with the NVMe 1.4 standard
- Sequential Read speeds up to 7400MB/s and Write speeds up to 7000MB/s
- Up to 3000 TBW
- Built-in data security and error-correction capabilities
- 1TB to 4TB capacities in M.2 2280 form factor
- Suitable for both desktop and notebook
- 5-Year Warranty
- Minimalist Design: Embracing the philosophy of simplicity, with clean lines that embody the essence of "less is more.“
- Ring Blade Design: Focuses airflow and reduces noise.
- The fan design uses Rifle bearings, which effectively reduce fan noise and increase operational lifespan.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Easy installation: Pre-installed Intel Bracket (1700/1851)
- install up to 10 x system fans, providing ventilation and stable performance to the whole system.
- Compatible with ATX Back-connect motherboard.
- Support dual 360 mm radiator at the top and side simultaneously.
- Synergize with a compatible MSI motherboard through bridging with a USB 3.2 Gen 2x2 Type-C (20Gbps) port for high speed data transmission.
- Semi-Modular
- 80 PLUS Bronze
- 120mm Fan
- DC to DC power Design
- Active PFC Design
- Industrial level protection with OVP, OCP, SCP, OPP, OTP
- Minimalist Design: Embracing the philosophy of simplicity, with clean lines that embody the essence of "less is more.“
- Ring Blade Design: Focuses airflow and reduces noise.
- The fan design uses Rifle bearings, which effectively reduce fan noise and increase operational lifespan.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Easy installation: Pre-installed Intel Bracket (1700/1851)
- The enlarged copper base surface area helps to achieve ultimate heat exchange with the latest CPU generation.
- Maximize micro-channels to dissipate heat efficiently
- Rotatable water block cap for 270-degree.
- ARGB fan can change the lighting by MSI center.
- Enhanced fan performance to dissipate heat quickly.
- Durable three phase motor of the pump generates minimal vibrations for long-lasting operation.
- Spilt pathway through the radiator rapidly dissipates heat.
- 80 Plus Bronze certified for high efficiency
- 120mm Low Noise Fan
- Industrial level protection with OVP,OCP,OPP,OTP, SCP
- DC-DC Circuit Design
- Active PFC design
- 3 x 120 mm ARGB cableless fan
- Magnetic design
- Supports PWM control, 0 ~ 1900±10% RPM
- Fan hub included, supports up to 18 x EZ120 fans
- Daisy chain cable included
- Exclusive Fluid Dynamic Bearing Structure
- The MAG FORGE 112R's ARGB lighting is fully supported by MSI Mystic Light.
- Insta-light Loop Button.
- Magnetic Dust Filter
- Tool-less Tempered Glass Side Panel.
- Optimize Airflow.
- ARGB Fan included.
- 240 mm Radiator Support.
- 330 mm GPU Length Support.
- 160 mm CPU Cooler Height Support.
- Supports Nvidia® GeForce RTX 50 series graphics cards
- Native 12V-2x6 connector
- Dual-color 12V-2x6 cable
- 80 PLUS Gold certified
- Optimized the sound level
- Main 105oC capacitor
- Embossed Jacket Cables, the cables are more bending and routing
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
- Minimalist Design: Embracing the philosophy of simplicity, with clean lines that embody the essence of "less is more.“
- Ring Blade Design: Focuses airflow and reduces noise.
- The fan design uses Rifle bearings, which effectively reduce fan noise and increase operational lifespan.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Easy installation: Pre-installed Intel Bracket (1700/1851)
- Supports NVIDIA® GeForce RTX 50 Series graphics cards
- ATX 3.1 ready, native PCIe 5.1 dual-color 16-pin cable
- Full modular design, Flat cables
- 80 Plus Gold certified for high efficiency
- Active PFC design, Industrial level protection with OVP,OCP,OPP,OTP, SCP,UVP
- 120mm Fluid Dynamic Bearing Fan
- LLC Full Bridge Topology with DC-DC module design
- Dual-color 12V-2x6 Cable
- ATX 3.1 Ready
- PCIe 5.1 Ready (600W)
- 105°C Main Electrolytic Capacitor
- 80 PLUS Platinum Certification
- Embossed Jacket Certified Cables
- Industrial level protection with OCP, OTP, OPP, SCP, OVP, UVP, SIP, NLO
- Supported ATX and Micro-ATX Back-connect motherboard.
- Supports 360 mm radiator on the top, side and bottom
- 270-degree panoramic tempered glass.
- Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear.
- 1-to-4 ARGB-Fan control board.
- Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission.
- Removable dust filter at the top, side and bottom being easily removed for cleaning.
- UNI front panel cable make your DIY process easier and create more possibilities to your system.
- Supports NVIDIA® GeForce RTX 50 Series graphics cards
- ATX 3.1 ready, native PCIe 5.1 dual-color 16-pin cable
- Full modular design, Flat cables
- 80 Plus Gold certified for high efficiency
- Active PFC design, Industrial level protection with OVP,OCP,OPP,OTP, SCP,UVP
- 120mm Fluid Dynamic Bearing Fan
- LLC Full Bridge Topology with DC-DC module design
- Single Frame, Three Fans - Raditor fans use a single frame, allowing fna speed and ARGB to be controlled with only two cable.
- EZ Swap Water Block - Each set includes two tool-free swappable water blocks for easy customization.
- Rotatable Blockhead - Mount the cold plate at any orientation, turn the blockhead up to 270 degrees, and keep it upright.
- Pump Motor Resonance Elimination - Silent operation with optimized performance.
- Evaporation Proof Tubing - Prevents coolant loss and eases bending for convenient assembly.
- Mystic Light Compatible - Customize your ARGB fans through MSI’s Mystic Light software.
- Supports Nvidia® GeForce RTX 50 Series graphics cards
- Dual-native 12V-2x6 Connectors
- Server-grade materials, SiC interleaved PFC MOSFET
- Tri-certified Titanium certification (80 PLUS / Cybenetics / PPLP)
- PCIe 5.1 and ATX 3.1 Ready
- Dual-color 12V-2x6 cables
- 100% all Japanese 105oC capacitor
- Full digital design with control MCU
- Industrial level protection with OCP/ OTP/ OPP/ SCP/ OVP/ UVP/ SIP/ NLO
- Dual-sided Infinite Mirror: Showcases MSI's product features from multiple angles, highlighting its craftsmanship and uniqueness.
- Fan Cable Management Cover: Covers pre-installed fan cables, enhancing aesthetics and creating a cleaner gaming setup.
- LDB Bearing: Balances lifespan and noise, is dust-proof, and adapts to various environments for stable fan operation.
- Integrated INTEL and AMD Installation Bracket: Environmentally friendly, avoids resource wastage, and ensures easy hardware upgrades for gamers.
- Easy installation
- PCIe Gen5x4 interface and complies with the NVMe 2.0 standard
- Sequential Read speeds up to 10,300MB/s and Write speeds up to 8,700MB/s
- Up to 1,200 TBW
- Built-in data security and error-correction capabilities
- 2TB capacity in M.2 2280 form factor
- Suitable for both desktop and notebook
- 5-Year Warranty
- Floating base design, creating a custom space for figures, turning hardware into desktop art.
- L-shaped curved fully tempered glass with an EZ-detach design for safer, more convenient removal.
- Supports regular ATX, Micro-ATX, Mini-ITX, and Back-connect ATX and Micro-ATX motherboards.
- Pre-installed with 2 x 140 mm ARGB reversed blades Fan at the side and 1 x 120 mm ARGB fan at the rear.
- Quick snap-and-lock PSU cover for easy assembly and streamlined cable management, optimizing the building process.
- Synergizes with compatible MSI motherboards through a USB 20Gbps (Type-C) port for high-speed data transmission.
- Tool-free design at the top, sides just a snap away—simply pull, release, and start in seconds.
- Mystic Light Compatible: Customize your ARGB fans through MSI's Mystic Light software.
- Evaporation Proof Tubing: Prevents coolant loss and eases bending for convenient assembly.
- Pump Motor Resonance Elimination: Silent operation with optimized performance.
- Double Ball Bearing: Delivers powerful performance and exceptional durability.
- 80 PLUS Gold
- ATX 3.1 Ready, handle up to 2x total power excursion and 3x GPU power excursion
- Compact sizing
- Full-Bridge + DC-DC +LLC
- Single Rail Design
- Industrial level protection with OVP, OCP, SCP, OPP,OTP
- Brown Box Packing
- 600 wattage
- 120mm Fan
- Industrial level protection with OVP, OTP, SCP, OPP, UVP
- Active PFC Design
- Flat Cable Equipment
- Copper Alloy Terminal
- Brown Box Packing
- Reverse Fan Blade
- Patented Magnetic Connector Block
- Magnetic Design optimizes installation experience
- Exclusive Fluid Dynamic Bearing with Extra Nut Fixing
- Copper Tube
- Fan hub & Daisy-chain cable are included in 3-fan pack


